Operation - Gastroback 42445 Bedienungsanleitung

3. Select a suitable place for operating the appliance near a sufficient wall power
outlet, leaving a distance of at least 20 cm to the edge of the table or counter
and to any other object (see: 'General Safety Instructions').
4. Fill the kettle with 1.0 litres of clear drinking water (MAX marking) and bring the
water to the boil (100°C, see: 'Operation'). Thereafter discard the water.
5. Repeat the recent step.
6. Then rinse the kettle with clear tap water. The appliance is now ready for use.

OPERATION

WARNING
sories are out of reach of young children. The appliance is intended for heating
clear drinking water via electrically powered heating elements. Do not attempt to
heat the kettle by any other source of heat. Do not fill in any other beverages, food,
or any foreign liquids for operation to avoid injuries and damage due to overhe-
ating, fire, electric shock, and high temperatures. Improper use or misuse may
cause severe injuries and damage. Unplug the appliance and leave it cool down
completely, before cleaning the appliance, and when the appliance is not in use.
Do not leave the power base unattended while connected to the power supply.
Always unplug the power base when the appliance is not in use.
Before operation, ensure that there are no leaks in the kettle. If water runs out during
operation, immediately unplug the appliance (see: ‚Solving Problems'). Regularly de-
scale the kettle (see: 'Care and Cleaning'). Do not use violence.
Ensure to place the appliance on a level, flat, stable, and dry surface. For operati-
on, do not place the appliance near the edge of the working space or on inclined
surfaces. Do not operate the appliance in a tray or tub or on a metal surface to
avoid high risk of electric shock, when overflow or splashing of hot water occurs.
To avoid overheating, before operation, always fill a sufficient amount of clear drin-
king water into the kettle (at least 0.3 litre/MIN). Always remove the kettle from
the power base and wait until the kettle cooled down, before filling the kettle.
Do not operate the appliance with the kettle empty. However, Do not fill in more
than the maximum amount (1.0 litre / MAX). If the kettle is overfilled, boiling water
may splash out. Always ensure to hold the kettle level, when it is filled. Do not leave
water in the kettle after use, to avoid excessive build-up of scale.
1. Place the power base on a suitable table or counter near an appropriate wall
power outlet.
2. Remove the kettle from the power base and open the lid. To pull the lid open,
grasp into the hollow in the lid.
– Always ensure that the appliance and all its parts and acces-
EN
39