Flammkraft Block R Gebrauchsanleitung Seite 74

Cleaning
6.5 Cleaning the burner
The burner inlet openings must be checked for blockages.
The main burners can be removed for thorough cleaning or maintenance of the
appliance.
 ATTENTION!
Risk of property damage due to improper handling!
The burner can be damaged if handled incorrectly.
When cleaning, make sure that no grease or other residue gets into the nozzle
openings.
Only clean the burner parts with mild soapy water
Do not operate the main burners when wet.
Make sure that a main burner that has become wet is sufficiently dried
through before use.
"7.6 Drying the burner" (page 77).
User manual | Block R | EN
74
Check the burner inlet port for
foreign objects or dirt.
Clean a blocked burner inlet opening.
Clean the appliance in the areas that
are now accessible.
Clean the gas outlet nozzles
(e.g. with a soft, clean cloth or
toothbrush).
6.6 Fitting appliance parts
 ATTENTION!
Risk of property damage due to improper use of the appliance parts!
Incorrectly fitted appliance parts can damage the burner and impair the function
of the slide-in support.
Make sure that the inner fuel element is inserted flat and straight in the outer
fuel element.
Ensure that the symbols stamped on the splash guard and slide-in support
line up over the symbol on the appliance (front left).
Make sure that all components are fitted.
Insert the appliance parts into the
appliance in reverse order.