Place the appliance in the desired
set-up location.
Secure the appliance against rolling
away by snapping the brakes in,
using the lever on the back.
If there is limited accessibility from
the back, the brakes can also be
operated from inside when the
drawer is open.
Screw out the four feet in the corners
of the appliance.
To ensure the correct stand, the
appliance must be supported by all four
feet.
Level the appliance by adjusting the
feet.
Make sure the drawer is flush with
the appliance.
If the drawer is diagonal from the body:
On the protruding side, screw out the
foot out farther.
User manual | Block R | EN
53
EN