Flammkraft Block R Gebrauchsanleitung Seite 73

 WARNING!
Risk of injury due to improper use of the barbecue intensive cleaner!
Contact with the cleaner may cause severe burns to the skin or serious eye
damage.
For safe use of the intensive barbecue cleaner:
Follow the instructions on the cleaner.
Only work in well-ventilated places.
Always wear protective clothing (including protective gloves, eye protection,
face protection) when using the product.
 ATTENTION!
Risk of property damage due to improper application of the intensive barbecue
cleaner!
The intensive barbecue cleaner can cause surface damage if used on unsuitable
materials.
Only clean stainless steel parts with the intensive barbecue cleaner
(e.g. burner crown, flame guide, splash guard).
Clean the inner and outer burner element and the simmer flame burner head
with a mild soapy solution only.
After the soaking time:
Take the soaked parts out of the tub or cleaning box.
Clean the parts with dish detergent and a suitable sponge.
Rinse the parts with plenty of water.
Dry the parts.
Put the dried parts in the appliance.
Spray stainless steel parts requiring
cleaning with the intensive barbecue
cleaner.
Place the sprayed parts in a tub or in
the cleaning box.
When using a tub:
Cover the tub.
When using the cleaning box:
Close the cleaning box with the lid.
Allow the parts to be cleaned to
soak for between 2 and 12 hours,
depending on the degree of soiling.
Make sure that the soaking parts
remain wet and do not dry out.
User manual | Block R | EN
EN
73