Flammkraft Block R Gebrauchsanleitung Seite 59

Insert the burner cover in the storage
slot (free-standing appliance only).
Remove the transport packaging
from the burner.
Insert the drip tray.
 WARNING!
Risk of crushing when setting down the burner cover!
The weight and shape of the burner cover can lead to crushing.
Make sure that there are no body parts between the worktop and the burner
cover when lowering the appliance.
Place the burner cover on the burner
crown according to the shape
specified by the worktop.
Pull the locking bolt to unlock the
handle.
Slide the handle to the left as far as
it will go.
The burner cover must fit snugly into the
worktop when lowered.
If the burner cover does not fit snugly
into the worktop when lowered:
Slide the handle to the right until it
clicks into place.
Line up the burner cover with the
worktop.
Pull the locking bolt to unlock the
handle.
Slide the handle to the left as far as
it will go.
User manual | Block R | EN
EN
59