Flammkraft Block R Gebrauchsanleitung Seite 54

Set-up
3.5 Setting up the built-in barbecue
All necessary attachments are in a separate box.
 WARNING!
Risk of injury due to incorrect handling of the appliance!
Be aware of the size and weight of the appliance when moving and setting up the
appliance. Serious injuries are possible if the appliance falls down unintentionally.
Always move the appliance with two people.
Wear suitable protective equipment
(e.g. gloves, safety shoes, safety goggles) when installing the appliance.
Select the location with consideration to the set-up location requirements.
"3.2 Set-up location requirements" (page 50).
Make sure that the safety distances are observed.
"3.2 Set-up location requirements" (page 50).
Ensure that the cabinet is sufficiently stable.
It is essential to comply with the following requirements in order to avoid
hazards:
 The appliance must not be installed under a flammable overhead structure.
 Installation is only permitted in a cabinet made of non-combustible material.
 The cabinet and worktop are suitable for the weight of the appliance.
"2.3 Technical data" (page 49).
User manual | Block R | EN
54
The following specifications must be observed:
 There is a 0.4 cm gap between the appliance and the worktop.
 Sufficiently large ventilation openings are provided when closing the body with
doors.
 The dimensions and the space under the appliance must be observed, the
pull-out and the drip tray are freely accessible.
 The doors are freely accessible.
 The doors are not locked.
 All closures on the appliance and on the gas cylinder must be easily
accessible.
 It must be possible to remove the gas cylinder from the body for connection,
disconnection and testing.