Flammkraft Block R Gebrauchsanleitung Seite 68

Use
5.6 Ending cooking
 WARNING!
Risk of crushing when setting down the burner cover!
The weight and shape of the burner cover can lead to crushing.
Make sure that there are no body parts between the worktop and the burner
cover when lowering the appliance.
 WARNING!
Risk of injury due to touching hot parts!
High temperatures are generated during operation of the appliance. The burner
cover may heat up due to residual heat after being placed on the appliance.
Wear barbecue gloves when using the appliance until it has cooled down
completely.
User manual | Block R | EN
68
Remove the wok from the appliance.
Turn the gas regulator to the
"Maximum" position on the wok
burner
Press the gas regulator.
Turn the gas regulator to the "Ignition
position" / "Simmer flame" position.
Press the gas regulator.
Turn the gas regulator to the "Off"
position
Stop the gas supply by closing the
gas cylinder.
Open the front drawer until it reaches
the locking point (free-standing
appliance only).
"3.4 Setting up the stand-alone
unit" (page 51).
Place the burner cover on the burner
crown according to the shape
specified by the worktop.