Cleaning And Maintaining The Drive Unit; Risk Of Injury - Fazua Ride 60 Originalbetriebsanleitung

Original instructiOns | English

16 CLEANING AND MAINTAINING THE DRIVE UNIT

If the drive system is set in motion while you are handling it, you may
injure yourself.
►To prevent the drive system from being set in motion, switch off
the drive system and, if necessary, secure it against being switched
back on unintentionally or unnoticed when cleaning the e-bike or
the components of the drive system. If necessary, remove the
battery before cleaning to prevent unintentional start-up*.
Improper cleaning can damage the drive unit.
►Never clean the drive unit with a hard water jet or a high-pressure
cleaner.
►Do not use any aggressive cleaning agents when cleaning.
►Do not use any sharp, angular or metallic objects for cleaning.
Always keep all components of the e-bike and drive system in a clean condition.
→
Clean the exterior of the drive unit gently with a cloth or soft brush.
→
If necessary, use a mild soap solution for the external removal of coarser
→
soiling.
Wipe all surfaces dry after cleaning.
→
IMPORTANT: Pay particular attention to the contacts and interfaces between
the battery and drive unit*: The interfaces must not be soiled or contaminated
and must be completely dried before inserting the battery to avoid damage.
Clean the cooling unit of the drive unit regularly.
→
Do not clean the radiator until it is visibly or heavily soiled!
If you have any questions about cleaning and maintenance of your drive system,
→
please contact a FAZUA service partner or visit the official FAZUA service plat-
form (https://fazua.com/de/support).
* This applies only if your e-bike is equipped with a removable battery (See Chapter 23 "Function and model variu -
ants of the battery").
CAUTION

Risk of injury!

NOTICE
Danger of damage!
23