Using The Battery; Inserting The Battery On The E-Bike/Removing It From The E-Bike; Inserting The Battery; Removing The Battery - Fazua Ride 60 Originalbetriebsanleitung

2 7 USING THE BAT TERY

27.1 Inserting the battery on the e-bike/removing it from the e-bike

This applies only if your e-bike is equipped with a removable battery
(See Chapter 23 "Function and model variants of the battery").

27.1.1 Inserting the battery

1. Check the battery for visible damage before insertion (visual check).
2. Place the battery with the interface [C.2] first on the corresponding interface
on the e-bike.
3. Swing the upper end of the battery into the down tube of the e-bike.
The battery is automatically locked in place when the two interfaces on the
battery and e-bike are correctly interlocked and the battery is swiveled fully
into the designated receptacle on the down tube. An audible engagement
sound ("click") is heard when the device engages.
Contact an authorised specialist if the battery cannot be inserted/if the
battery does not (audibly) engage on the e-bike.

27.1.2 Removing the battery

1. Secure the battery with one hand.
2. Reach into the cutout on the battery and push the elastic pushbutton [C.3] in
as far as it will go.
42
C.2
English | Original instructiOns
Click