Technical Data For The Control Element And Display; Driving And Status Information On The Display; E-Bike Status - Fazua Ride 60 Originalbetriebsanleitung

19 TECHNICAL DATA FOR THE CONTROL ELEMENT AND DISPLAY

Model designations
Combined component
Separate components
Protection type (in installed condition)
Operating temperature
Storage temperature (< 1 month)*

20 DRIVING AND STATUS INFORMATION ON THE DISPLAY

The LED display [B.3] has 5 LEDs.
• All five LEDs together serve as a display
for the charge level and the set assis-
tance level of the pedal assist.
• The upper of the five LEDs (see arrow in
figure on the right) additionally informs
you about the status of your e-bike.

20.1 E-bike status

The upper LED on the display indicates a
status change or a pending fault.
The status display LEDs light up in different
colours depending on which status is
displayed.
If no fault is detected, the LED will act as one
of the five LEDs that indicate the charge level
or set assistance level.
* The specification only applies if your e-bike is equipped with a removable battery and you have removed the
battery before storage (See Chapter 23 "Function and model variants of the battery").
26
English | Original instructiOns
Control Hub (control element,
→
including the display)
LED Hub (= display)
→
Ring Control (= control element)
→
IP54
-5°C to +45°C
→
(ambient temperature)
→
-15°C to +60°C
Control Hub
LED Hub