Charging The Battery; Preparing The Charger; Connecting The Charger; Charging The (Integrated) Battery In The E-Bike - Fazua Ride 60 Originalbetriebsanleitung

28 CHARGING THE BAT TERY
Regularly charge the battery via the charging socket [C.5] on the e-bike (See
Chapter 28.2.1 "Charging the (integrated) battery in the e-bike").
If you have a removable battery, you can alternatively remove it from the e-bike
and charge it separately (See Chapter 28.2.2 "Charging the battery separately").
The charging process can be interrupted at any time.
IMPORTANT: Charge the battery only within the specified temperature range.
Charging outside the specified temperatures may damage the charger or battery.
Fully charge the battery prior to initial operation so that you can use the full
→
capacity of the battery.

28.1 Preparing the charger

1. Take the mains adapter [C.6] and the mains cable [C.9].
2. Plug the appliance plug [C.10] of the mains cable into the corresponding socket
on the mains adapter.

28.2 Connecting the charger

28.2.1 Charging the (integrated) battery in the e-bike

1. Open the cover flap to access the charging socket [C.5] on the e-bike.
2. Insert the charging plug [C.8] into the charging socket [C.5].
C.5
3. Insert the mains plug [C.9] into a suitable wall outlet to establish the power
connection.

28.2.2 Charging the battery separately

1. Remove the battery from the e-bike (See Chapter 27.1.2 "Removing the
battery").
44
C.8
English | Original instructiOns