Operating The Drive System - FAZUA Evation Kurzanleitung

Operating the drive system

Switching on the drive system
► On the Remote b press one of the three buttons C1 , C2 or C3 .
or
► On Remote fX/Remote bX, press the centre button C2 .
Setting the support level
→ The support level set is indicated by the colour of the corresponding LEDs on
the remote (see overview table "Support levels" on page 15).
► Press the upper button/upper touch sensor C1 to switch to the next
higher support level.
► Press the lower button/lower touch sensor C3 to switch to the next
lower support level.
Switching off the drive system
► Hold down the centre button C2 for 2 seconds (Remote b) or 1 second
(Remote fX and Remote bX).
or
► Remove the Drivepack from your e-bike.
or
► Turn off the battery by holding down the on/off button D4 for about
2 seconds.
The LEDs next to the on/off button D4 that go out in sequence indicate
that the battery is switching off ("Off animation").
| evation
11