29 CLEANING THE BAT TERY AND CHARGER
Improper cleaning can damage the battery or the charger.
►Never immerse the battery or the charger in water or other liquids.
Keep liquids away from the battery and charger.
►Do not use any aggressive cleaning agents when cleaning.
►Do not use any sharp, angular or metallic objects for cleaning.
►Always keep all components of the e-bike and drive system in a
clean condition.
IMPORTANT: The cleaning instructions for the battery only apply to
removable batteries (See Chapter 23 "Function and model variants of
the battery"). If your e-bike is equipped with a permanently installed
battery, you do not need to clean it separately!
29.1 Cleaning the battery
Clean the exterior of the battery gently with a cloth or soft brush.
→
If necessary, use a mild soap solution for the external removal of coarser
→
soiling.
IMPORTANT: Dampen the cloth only slightly or wring it out well to prevent liquid
from penetrating the inside of the housing and the contacts/interfaces. If
liquid gets into the inside of the housing or into the contacts/interfaces, the
battery may be damaged and electrical safety may be impaired.
Wipe all surfaces dry after cleaning.
→
IMPORTANT: Pay particular attention to the contacts and interfaces between
the battery and drive unit*: The interfaces must not be soiled or contaminated
and must be completely dried before inserting the battery to avoid damage.
29.2 Cleaning the charger
Clean the exterior of the charger gently with a cloth or soft brush.
→
If necessary, use a mild soap solution for the external removal of coarser
→
soiling.
* This applies only if your e-bike is equipped with a removable battery (See Chapter 23 "Function and model variu -
ants of the battery").
46
NOTICE
Danger of damage!
English | Original instructiOns