FAZUA RIDE 60 Originalbetriebsanleitung Seite 85

Original instructiOns | English
2 2 CLEANING AND MAINTAINING THE CONTROL ELEMENT AND
DISPLAY
If the drive system is set in motion while you are handling it, you may
injure yourself.
►Be careful not to start the drive system unintentionally when
cleaning the control element. If necessary, remove the battery
before cleaning to prevent unintentional start-up*.
Improper cleaning may damage the control element or display.
►Never immerse the control element and display in water or other
liquids for cleaning.
►Do not use any aggressive cleaning agents when cleaning.
►Do not use any sharp, angular or metallic objects for cleaning.
Always keep all components of the e-bike and drive system in a clean condition.
→
Clean the exterior of the control element and display gently with a cloth or soft
→
brush.
If necessary, use a mild soap solution for the external removal of coarser
→
soiling.
IMPORTANT: Dampen the cloth only slightly or wring it out well to prevent
liquid from penetrating the inside of the housing and the connections. If liquid
enters the inside of the housing or the connections, the control element and
the display may be damaged.
Wipe all surfaces dry after cleaning.
→
* This applies only if your e-bike is equipped with a removable battery (See Chapter 23 "Function and model variu -
ants of the battery").
CAUTION
Risk of injury!
NOTICE
Danger of damage!
33