FAZUA evation Kurzanleitung Seite 11

All manuals and user guides at all-guides.com
Operating drive system
Switch on drive system
► On the "b" model remote press one of the three buttons C1 ,
C2 or C3 .
or
► On the "fX" model remote press the center button C2 .
Set support level
→ The support level set is indicated by the color of the corresponding LEDs on
the remote (see overview table "Support levels" on Page 15).
► Press the upper button/upper touch sensor C1 , to switch to the next
higher support level.
► Press the lower button/lower touch sensor C3 , to switch to the next
lower support level.
Switch off drive system
► Hold down the center button C2 for 2 seconds (model "b") or 1 second
(model "fX").
or
► Remove the drivepack from your eBike.
or
► Turn off the battery by holding down the on/off button D4 for about
2 seconds.
The successively extinguishing LEDs next to the on/off button D4
signal that the battery is switching off ("Off animation").
EN
11