Push Assist" Mode; General Information On The Mode - Fazua Ride 60 Originalbetriebsanleitung

Original instructiOns | English

21.5 "Push Assist" mode

Danger due to distraction during operation!
If the drive system is put into operation in inappropriate situations,
this can result in accidents and serious injuries.
►Use the "Push Assist" function only when pushing the e-bike.
►Hold the e-bike securely with both hands when push assist is
active, and ensure that the wheels are in contact with the ground.
If you are pushing the e-bike with push assist activated, the pedals
will also turn slowly and you could be injured on them.
►Be careful not to injure yourself on the rotating pedals when using
the "Push Assist" function.
The "Push Assist" mode is a model-dependent function of the control.
The following controls have the "Push Assist" mode:
• Control Hub
• Ring Control

21.5.1 General information on the mode

Push assist makes it easier to push the e-bike. In "Push Assist" mode, your e-bike
can reach a speed of up to 6km/h depending on the gear set.
You can brake the speed of the e-bike to your walking pace by holding or restraining
the e-bike while pushing.
Push assist is automatically deactivated in the following situations:
• You release the operating switch,
• The wheels on the e-bike are blocked,
• The e-bike reaches a speed of more than 6 km/h.
WARNING
CAUTION
Risk of injury!
31