Checking The Charge Level And Soh Of The Battery - Fazua Ride 60 Originalbetriebsanleitung

Original instructiOns | English
3. Press and hold the push button and gently pull the battery forwards out of the
battery holder.
4. Remove the battery from the interface on the e-bike.

27.2 Checking the charge level and SOH of the battery

This applies only if your e-bike is equipped with a removable battery
(See Chapter 23 "Function and model variants of the battery").
Checking the SOH/current charge level of the battery
Tilt the battery back and forth to check the current charge level (e.g., before
→
or during a (longer) trip).
Depending on the charge level, different numbers of LEDs light up on the display
in the battery section. Each LED represents 20% of the capacity. If all five LEDs
are lit, the battery is fully charged.
IMPORTANT: The charge level indicator is not designed to be used during the
charging process to ascertain whether the battery has already reached maximum
charge or whether it can still be charged. You can use the LED indicator [C.7] on
the charger for this purpose.
→
More detailed information can be found
Querying the SOH
The "ageing state" of the battery, the so-called SOH ("state of health"), can be
queried via the FAZUA Service Toolbox and via the FAZUA app.
For the query, connect the e-bike (with inserted battery) via the USB socket* to
→
a computer with access to the FAZUA Service Toolbox or open the FAZUA app**.
* The USB cable is not included in the scope of delivery.
** See in chapter 5 "FAZUA App" for more information on the FAZUA app.
C.3
in chapter 28.3 "Charging process".
43