General Safety Instructions For The Drive System - Fazua Ride 60 Originalbetriebsanleitung

Original instructiOns | English
This symbol indicates products that meet all requirements for
obtaining the European UKCA marking.
Specific information can be found at in chapter "Declarations of
conformity".
The "Geprüfte Sicherheit" (GS mark) seal of approval is awarded by
independent certification bodies.
A device marked with the GS test seal complies with the safety-rel-
evant requirements of the German Product Safety Act (Produkt-
sicherheitsgesetz; ProdSG).
The "UL®-Listed" test seal is awarded by the US certification body,
UL.
A device marked with the "UL®-Listed" test seal shown here
complies with the safety-relevant requirements for Canada and
the USA.
The FCC Seal is issued by the "Federal Communications Commis-
sion", an independent U.S. government agency responsible for
implementing and enforcing U.S. communications laws and regu-
lations.
An electrical device bearing the FCC seal complies with U.S. electro-
magnetic compatibility requirements.

2.3 General safety instructions for the drive system

The general safety instructions listed below refer to the drive system as a whole
and must always be taken into account when using the e-bike equipped with it.
There are fundamentally specific dangers to users of e-bikes.
Depending on the e-bike model into which the drive system is installed,
additional dangers may arise that are not covered here.
►Read and follow the manufacturer's instructions for your e-bike.
►Obtain information on any relevant national standards relating to
e-bikes and comply with these.
WARNING
Dangers to e-bike users!
9