Zero Submenu Item; Rs232/Usb Submenu Item; Display Submenu Item - Wika Mensor Cpc2000 Betriebsanleitung

6. Commissioning, operation

5.8.2.1 ZERO submenu item

EN
Menu item
AUTO ZERO
INTERVAL

5.8.2.2 RS232/USB submenu item

For information on this menu item, please refer to chapter 6 "Interface".

5.8.2.3 DISPLAY submenu item

The brightness of the display can be set from 0 ... 100 %.
1. Set the value range 0 ... 100 % with the [▲] or [▼] buttons.
2. Confirm with [SELECT].
28
ZERO
-------------------------
AUTO-ZERO
INTERVAL
Meaning
Switch zero point correction on or off
Zero point correction can be carried out manually using the
OFF
[ZERO] button
ON Zero point correction is carried out automatically
1. Activate or deactivate with the [▲] or [▼] buttons
2. Confirm with [SELECT].
Zero point correction is carried out in adjustable time intervals
The range is 1 ... 60 minutes
1. Set the value range 0 ... 100 % with the [▲] or [▼] buttons.
2. Confirm with [SELECT].
DISPLAY
-------------------------
BRIGHTNESS:
OFF
60min
100%
WIKA operating instructions, model CPC2000