Commissioning, Operation; The Menu Items; Settings Submenu Item - Wika Mensor Cpc2000 Betriebsanleitung

6. Commissioning, operation

Navigation within the menu:
[SELECT]: Acts to confirm the relevant setting
SELECT [◀] or [▶] arrows: Setting of the active decimal place
[▲] or [▼] arrows: Changes between the different submenu items

5.8.1 The menu items

1. Press the [MENU] button.
2. With the [▲] or [▼] button, select menu item.
3. Confirm with [SELECT].
⇒
Selected menu item will be accessed.

5.8.2 SETTINGS submenu item

Menu item
ZERO
RS232/USB
DISPLAY
AUTO MODE
INFO
WIKA operating instructions, model CPC2000
SETTINGS
-------------------------
ZERO
RS232/USB
DISPLAY
AUTO-MODE
INFO
Meaning
Switching the automatic zero point correction on and off following exit
from the menu. It is even possible to set at what intervals the instrument
will automatically perform a zero point correction.
Selection of the appropriate serial interface
Brightness setting
Setting of the pressure range, the pressure unit and number of steps the
pressure range will be divided up into. Different values can be assigned
to STEPS UP / STEPS DOWN.
Basic information on the instrument
-->
-->
-->
-->
-->
EN
27