C) Installing The Wings; D) Attachment Of The Hook-And-Loop Tape - Reely Speedy Bedienungsanleitung

c) Installing the Wings

First push the square wing connector (1) into the right
wing.
Then push the connector through the fuselage and thread
the connection plug of the aileron servos (2) through the
provided opening.
After you have installed the left wing according to the same
chart, both wing halves are pushed together to the stop
and secured from the bottom of the fuselage with the wing
screw (4).
d) Attachment
of the Hook-and-Loop Tape
The hook part of the hook-and-loop tape (1) is glue to the
fuselage according to the upper illustration in figure 6.
The fluffy part of the hook-and-loop tape (2) is glued to the
narrow side of the flight battery.
38
Figure 5
Figure 6