Installing The Wings; A) Connecting Motors; B) Installing The Wings - Reely Bimot Bedienungsanleitung

11.

Installing the Wings

a) Connect Motors
Connect the motor cables of the wing (figure 5a, item 1) to the two plug connectors coming out of the RC box (figure
5a, item 2). The plugs are mechanically protected against polarity reversal. Do not use any force when pushing the
plug connectors together, however!
Figure 5a

b) Installing the Wings

Push the wing with the latching tab (figure 5a, item 3) into the
indentation at the fuselage at the front (figure 5a, item 4).
Put the rear edge of the wing flat on the fuselage. A magnet is
integrated there (figure 5a, item 5), which will attach the wing se-
curely to the fuselage.
Observe correct alignment of the wing according to figure 5b both
during assembly and before any flight.
Figure 5b
43