Reely Speedy Bedienungsanleitung Seite 45

Depending on the menu item called, the flight controller now emits 1, 2 or 3 short signals ( - , - - , - - - ). The assignment
of the signal sounds can be taken from the following table.
Function
Brake
Battery type
Motor deactivation
Deactivation voltage
Motor start-up behaviour
Motor timing
When the desired setting has been acoustically indicated, move the control lever for the motor function to the full throt-
tle position without delay. The motor will alternatingly emit two high and two low signal sounds ( ¯ _ ¯ _ ) to confirm
that the selected value is saved.
In order to leave the programming menu, move the control lever for the motor function back to the "motor off" position
within two seconds. There will be a sound sequence that indicates the cell number and a slightly longer sound. The
flight controller is ready again.
If the control lever for the motor function is not moved to the "motor off" position, the flight controller remains
in programming mode and switches through the menu items acoustically. Further settings can be made.
Disconnecting the flight battery or calling menu item 8 leaves the programming menu.
1x short sound
On
LiPo
Soft (reduce)
Low (2.85 V/cell)
Normal
Low (3.75°)
2x short sounds
Switched off
NiMH
Hard (switch off)
Medium (3.15 V/cell)
Soft
Medium (15°)
3x short sounds
High (3.3 V/cell)
Very soft
High (25°)
45