probst TM-D-A Betriebsanleitung Seite 175

Assembly:
• Assemble in reverse sequence.
• Apply lubricant as specified by HATZ.
• Torque to specification !
• Ensure gasket-kit is fitted in correct sequence i.e. the creased gaskets (6) face towards
exhaust silencer.
• Make sure that all parts are correctly placed and tightened.
SAMPLING OF EXHAUST EMISSIONS
After the engine is installed in the equipment and placed in service, the sampling of
exhaust emissions can be performed in a way that prevents diluting the exhaust sample
with ambient air as follows:
Version 1
Specification 1: Adding a 20-centimeter linear extension to the exhaust pipe
49