MADRIX PLEXUS Handbuch Seite 88

88 MADRIX PLEXUS User Manual / Handbuch
Example:
We have created a Patch for 6 DMX universes and we are using 3 MADRIX PLEXUS. PLEXUS
number 1 should play DMX universe 1 and 2, PLEXUS number 2 should play DMX universe 3 and 4,
PLEXUS number 3 should play DMX universe 5 and 6. Then, we need to create 3 list entries or use
the 'Auto' button.
(We will also have to generate 3 DMX Data Files (*.dxd) in the next step.)
Generating DMX Data Files (*.dxd)
Please make sure that your virtual matrix (Patch) is configured correctly before generating
DMX Data Files (*.dxd).
1. Select your MADRIX Record File (*.mrec) in the list. Please only select one file!
2. Open the tab 'Edit Record' to double-check the recording (e.g. check the colors or the length
of the effect).
3. Open the tab 'PLEXUS Conversion' and press 'Auto' to quickly proceed. Or configure your list
entry or several entries manually.
4. Press 'Generate' to convert the MADRIX Record File (*.mrec) into one or multiple DMX Data
Files (*.dxd).
5. The newly create DMX Data Files (*.dxd) will be added to the above list.
© 2013 inoage GmbH