File System; Extension Port - MADRIX PLEXUS Handbuch

26 MADRIX PLEXUS User Manual / Handbuch

File System

If you need to prepare an SD card to be used with your MADRIX PLEXUS or if you would like to
clear up your currently used SD card, you may reformat the SD card in Windows.
Please note: Formatting your SD card will erase all data on the card!
Your SD card needs to be formatted using either the FAT16 or FAT32 file system.

Extension Port

1.2.5
Overview
The MADRIX PLEXUS features a 15-pin serial connector with individually addressable Ports. The
extension port allows you to connect external analog or digital devices for remote control.
Extension port specifications:
In MADRIX, please open the menu 'Preferences'
Ports' to configure each port individually for the corresponding PLEXUSConfiguration. Select a
PLEXUS Configuration first. For more information, see
Available Settings
The following table shows available settings of the individual pins:
Pin Assignment
1
15-pin, D-Sub, US, female
Available Settings
Ground
'PLEXUS Configuration... '
Stand-Alone Mode.
'Extension
© 2013 inoage GmbH