Sd Cards; Inserting The Sd Card - MADRIX PLEXUS Handbuch

SD Cards

1.2.4
Overview
The integrated SD card slot is located at the top of the device. In order to access it, please open
the metal lid first (See 'How To Open The Metal Lid' on page 5 of the MADRIX PLEXUS Quick Start
Guide).
The slot supports SD or SDHC cards. SDHC cards are recommended.
Please note: The package of the PLEXUS includes one SD card with 2 GB capacity. The SD
card is already inserted into the SD card slot when shipped.
When shipped, the SD card of the PLEXUS will already have a sample show on it.

Inserting The SD Card

Hold the SD card as shown on the device! The canted edge must point to the
status LED and the pins must face towards the display. Now, carefully push the SD card into the
SD card slot until it clicks and snaps into its position.
Removing The SD Card
Slowly and carefully press the already inserted SD card into the device a little further. Then,
release the pressure. The implemented mechanism will automatically release the SD card, which
will then stick out from the slot. Use two fingers to pull the card out of the slot.
© 2013 inoage GmbH
MADRIX PLEXUS User Manual (English) 25