By default, 'Enable' as well as 'Output' should be enabled for every DMX port.
Please check if both options, 'Enable' and 'Output', are activated!
Your PLEXUS device is now configured to output DMX data.
Setting Up The DMX Universe
use the two arrow buttons to adjust the values. Press 'Apply' afterwards.
Make sure that this configuration match the settings of your virtual matrix in the Patch.
© 2013 inoage GmbH
In the next step, set up the DMX 'Universe' for each DMX port. Simply
MADRIX PLEXUS User Manual (English)
39