MADRIX PLEXUS Handbuch Seite 63

MADRIX PLEXUS User Manual (English) 63
Settings Of The Device
Navigate to the menu 'Network' 'Art-Net'.
In this menu, the current settings regarding Art-Net, a network protocol for DMX-over-Ethernet,
are shown. More specifically, this menu contains the universes settings. Technically speaking Art-
Net universes range from 0 - 255, but they are displayed on the PLEXUS and in MADRIX from 1 to
256.
Art-Net -> DMX 1 shows which Art-Net universe is assigned to the first XLR port for output (DMX
1).
Art-Net -> DMX 2 shows which Art-Net universe is assigned to the second XLR port for output
(DMX 2).
DMX 1 -> Art-Net shows which Art-Net universe is assigned to the first XLR port for input (DMX
1).
DMX 2 -> Art-Net shows which Art-Net universe is assigned to the second XLR port for input
(DMX 2).
Please change the Universe according to your requirements or deactivate the option by choosing
Off.
Art-Net -> DMX 1 and Art-Net -> DMX 2 specify if incoming Art-Net data is routed to the
corresponding XLR port (DMX 1 or DMX 2) and which Art-Net universe should function as source
for each port. These settings should be activated if you want to connect your MADRIX PC to your
PLEXUS device using network cables. In Live Mode, you would then send data over the network to
the PLEXUS and the PLEXUS outputs the data to each XLR port, where your LED fixtures, LED
controllers, or LED drivers would be connected.
© 2013 inoage GmbH