Version Information; Madrix Plexus (Hardware); Lcd Graphics Display (Plexus Menus) - MADRIX PLEXUS Handbuch

Version Information

The current MADRIX version is: MADRIX 3.0a
The current MADRIX PLEXUS firmware version is: 1.07.4369
It is recommended to always use the latest firmware and drivers.
1.2

MADRIX PLEXUS (Hardware)

In general, this device is designed to be operated as a hardware control interface to be connected
towards various types of controllable lights / lighting controllers via DMX512 (USB-to-DMX) or Art-
Net (DMX-over-Ethernet). Do not use the interface for any other, deviant purpose.
The device can be connected to and disconnected from the PC during use and without a reboot
(Hot Swapping & Plug and Play). Multiple interfaces can be used at the same time. Please mind the
correct supply of power in this case.
Please read the following subtopics to learn more about MADRIX PLEXUS.

LCD Graphics Display (PLEXUS Menus)

1.2.1
Introduction
This chapter describes the numerous menus provided on the device as well as further information
regarding the LCD graphics display.
© 2013 inoage GmbH
The MADRIX PLEXUS is a USB 2.0 DMX512 interface.
MADRIX PLEXUS User Manual (English) 7