38
MADRIX PLEXUS User Manual / Handbuch
Connecting MADRIX PLEXUS To Your PC
Now, please connect the MADRIX directly to a free USB 2.0 port of your computer. If the MADRIX
PLEXUS driver has been installed properly, the status LEDs will light up accordingly, as described in
the chapter Troubleshooting.
Start the MADRIX software now if not yet done.
Configuring Your Virtual Matrix In MADRIX
You will need to configure your virtual matrix according to your LED installation.
In MADRIX, navigate to the menu 'Preferences'
'Matrix Generator' or 'Preferences'
'Patch' for this task.
For more information, please read the MADRIX Help And Manual.
Configuring DMX-OUT In MADRIX
Activating Your Device
In MADRIX, navigate to 'Preferences'
'Device Manager' (or press 'F4').
The first tab 'DMX Devices' shows a list of connected devices.
Press 'Rescan For Devices' if your device is not shown in the list.
Two list entries will be created for your PLEXUS device, one entry for every DMX port ('DMX 1' and
'DMX 2').
© 2013 inoage GmbH