MADRIX PLEXUS Handbuch Seite 122

122 MADRIX PLEXUS User Manual / Handbuch
If you choose to control Intensity Groups for your Master interface (Master-Slave
Synchronization), Slave interfaces can have their Intensity Groups controlled as well, when this
option is selected in the Sync menu ('Network'
Monitor Remote
Navigate to the menu 'Remote'
Use this menu to monitor and check incoming DMX data for Remote Control (DMX 1 or DMX 2). All
20 channels can be monitored using hexadecimal values.
Resetting Remote Control Settings
When you are using Direct Remote Control, you are changing settings of the device directly. Of
course, you can reset these settings back to original values.
But if for some reason Direct Remote Control via DMX-IN or Art-Net is not available anymore, you
can use different PLEXUS Menus to adjust the settings manually.
Remote Control Functionality
Scene I, Scene II
Next, Previous, Play, Pause, Play / Pause, Stop
'Sync').
'Monitor Remote'.
'Stand-Alone'
'Stand-Alone'
PLEXUS Menu
'Scenes'
'Playback'
© 2013 inoage GmbH