MADRIX PLEXUS Handbuch Seite 120

120 MADRIX PLEXUS User Manual / Handbuch
Play
Pause
Play / Pause
Stop
Intensity
0 - 100%
Speed
1 - 1000%
Speed
1 - 100%
Freeze
Intensity
Group 1
Intensity
Group 2
5 On: will start playback.
> 127
Off:
< 128
6 On: will halt playback.
> 127
Off:
< 128
7 On: will either halt or start playback again,
> 127 whichever is currently not active.
Off:
< 128
8 On: will interrupt and stop playback.
> 127
Off:
< 128
9 0 - 255 will change the Brightness level from 0% to a
maximum of 100%. The default value is 100%.
10 0 - 255 will change the Speed from 1% to a maximum
of 1000%. Works in combination with function
Speed 1 -100%. The default value of Speed is
100%.
11 0 - 255 will change the Speed from 1% to a maximum
of 100% in order to have available smaller
steps for changes of Speed. Works in
combination with function Speed 1 -1000%.
This Speed value will be added to the first
Speed value (DMX channel 10) up to a total
maximum of 1000%. That means: Speed of
Channel 10 + Speed of Channel 11 = Total
Speed. The default value of Speed is 100%.
12 On: will Freeze (or Unfreeze) output. The default
> 127 value is Off.
Off:
< 128
13 0 - 255 defines a mask. When creating DMX Data Files
(*.dxd) in MADRIX, color channel Red will be
automatically assigned. The default value is
255/100% (full intensity).
14 0 - 255 defines a mask. When creating DMX Data Files
(*.dxd) in MADRIX, color channel Green will be
automatically assigned. The default value is
255/100% (full intensity).
© 2013 inoage GmbH