Menu Network - MADRIX PLEXUS Handbuch

12 MADRIX PLEXUS User Manual / Handbuch

Menu Network

The PLEXUS menu 'Network' contains 2 entries.
Art-Net
Use or to navigate.
Press to reduce the Intensity for an Intensity Group (IG 1 - IG 8).
Press to increase Intensity.
Minimum Intensity is 0%. Maximum Intensity is 100%. The default value
is 100%.
Please note: Intensity, Speed, and Intensity Groups are permanent
settings, which the device will remember. They will remain even after a
restart of the device.
Please note: You may reset to default values (100%) by pressing "
and " or " and " at the same time for 2 seconds.
You can also configure the settings in the PLEXUS Configuration dialog
using MADRIX. For more information, see
Navigate to the menu 'Network'
In this menu, the current settings regarding Art-Net, a network protocol
for DMX-over-Ethernet, are shown. More specifically, this menu
contains the universes settings. Technically speaking Art-Net universes
range from 0 to 255, but they are displayed on the PLEXUS and in
MADRIX from 1 to 256.
Managing Devices
'Art-Net'.
Further.
© 2013 inoage GmbH