Network Settings - MADRIX PLEXUS Handbuch

Network Settings

Please make sure that the network settings of your operating system and the settings of
your PLEXUS device are correct!
To configure the IP address, subnet mask, and standard gateway of your device, go to the
PLEXUS menu 'Settings'
In Windows, please navigate to the corresponding item to change the network settings of your
operating system.
In general, these settings are recommended:
Device and network card:
· 2.0.0.1 ... 2.255.255.254 or
· 10.0.0.1 ... 10.255.255.254
Subnet mask:
· 255.0.0.0
It is recommended to use this address area.
Please note: Recently, the 2.x network range has been made public. That is why MADRIX PLEXUS
will have an IP address in the 10.x address range when shipped.
Settings Of The Device
© 2013 inoage GmbH
'Network'. Or use the
MADRIX PLEXUS User Manual (English)
PLEXUS Configuration dialog.
49