MADRIX PLEXUS Handbuch Seite 87

'Author', 'Scene Name', 'File Name' can be changed. They define how the new DMX Data File
will be named after the conversion. Select an entry. Double-click on the particular column and
enter the values or characters using the keyboard. Use Enter to apply your changes. Please
make sure that your 'File Name' has the ending '*.dxd'.
'DMX 1' defines which DMX universe of your virtual matrix (Patch) will be used for the first output
port of your PLEXUS. Select an entry. Perform a double-click and simply enter the number of the
universe. Use Enter to apply the changes. Select 'No' if the output port should be deactivated.
'DMX 2' defines which DMX universe of your virtual matrix (Patch) will be used for the second
output port of your PLEXUS. Select an entry. Perform a double-click and simply enter the number
of the universe. Use Enter to apply the changes. Select 'No' if the output port should be
deactivated.
'Use Master Values' can be activated if you have used the Master Fader during recording. Then,
your converted record will include the brightness levels set by the Master Fader during the
recording. Leave the option unchanged if your did not use the Master Fader during recording.
Please note: If your are using more than 2 DMX universes and more than 1 MADRIX PLEXUS
at the same time, please make sure to have a list entry for each PLEXUS (You will need 1 list
entry for each PLEXUS of your installation).
© 2013 inoage GmbH
MADRIX PLEXUS User Manual (English) 87