Configuring Dmx-In In Madrix - MADRIX PLEXUS Handbuch

44 MADRIX PLEXUS User Manual / Handbuch

Configuring DMX-IN In MADRIX

Activating Your Device
In MADRIX, navigate to the menu 'Preferences' 'Device Manager' (or press 'F4').
The first tab 'DMX Devices' shows a list of connected devices which were found in the network.
Press 'Rescan For Devices' if your device is not shown in the list.
Two list entries will be automatically created for your PLEXUS device, one entry for every DMX
port ('DMX 1' and 'DMX2').
By default, 'Enable' as well as 'Output' is enabled for every DMX port. Please enable now 'Input'
for the specific DMX port.
© 2013 inoage GmbH