MADRIX PLEXUS Handbuch Seite 123

Intensity, Speed
Intensity Group 1 - 8
Freeze
Important Information
When using Direct Remote Control, please be aware of other settings of the PLEXUS device.
Please pay special attention to the menu 'Network'
Art-Net -> DMX 1 and Art-Net -> DMX 2 specify if incoming Art-Net data is routed to the
corresponding XLR port (DMX 1 or DMX 2).
In this way, you can route incoming Art-Net data to the two XLR ports for output. But if you are
using Remote Control via DMX at the same time, you might use an XLR port for input and output at
the same time as a result. Please avoid such a configuration, because problems are very
likely.
© 2013 inoage GmbH
MADRIX PLEXUS User Manual (English)
'Stand-Alone' 'Intensity/Speed'
'Tools' 'Freeze'
'Art-Net'.
123