Menu Settings
The PLEXUS menu 'Settings' contains 5 entries.
Clock
Network
© 2013 inoage GmbH
Navigate to the menu 'Settings'
The date and time set on the device will be displayed, including the
option to set up summer time (Daylight Saving Time, DST).
DST will influence calculation of sunrise and sunset and as such also
indirectly helps you with your Timers.
You may change the settings in this menu, on the device
Values).
Or you can synchronize the clock with your computer. For more
information, see
Managing Devices
Navigate to the menu 'Settings'
IP address, subnet mask and standard gateway of the PLEXUS will be
shown. These are basic settings for network-based communication with
the device. Make sure to have the correct network settings (TCP/IP)
set up in your operating system also!
You may change the settings in this menu, on the device
Values).
You can also configure the settings in the PLEXUS Configuration dialog
using MADRIX. For more information, see
MADRIX PLEXUS User Manual (English)
'Clock'.
Further.
'Network'.
Managing Devices
19
(How To Edit
(How To Edit
Further.