MADRIX PLEXUS Handbuch Seite 80

80 MADRIX PLEXUS User Manual / Handbuch
Creating A Record File
Please make sure to configure all available options before recording (see above).
Step 1)
Begin recording by pressing 'Start'. MADRIX will start to record the Main Output.
Please note: When recording without a Cue List, you can change Storage Places, use the cross-
fader, use the Master Fader, etc. in order to customize your record.
Step 2)
The Time is displayed in HH:MM:SS:FF (Hours:Minutes:Seconds:Frames).
Various information will be displayed.
© 2013 inoage GmbH