MADRIX PLEXUS Handbuch Seite 130

130 MADRIX PLEXUS User Manual / Handbuch
Version 1.04.3578
Released with: MADRIX 2.14 / March 2012
Requires PLEXUS driver 6.0.515.1.
Fixed a problem when showing the start screen, while Invert was activated for the display.
Changed Art-Net universes to be displayed from 1 to 256, instead from 0 to 255.
A multitude of settings can now additionally be set up in the PLEXUS Configuration Dialog in
MADRIX, while they were only available on the device before.
Added new language for menus: Spanish.
Added new PLEXUS menu: 'Remote Control', to send remote commands directly to the PLEXUS
unit; incl. Remote Thru.
Version 1.05.4001
Released with: MADRIX 2.14a / July 2012
Requires PLEXUS driver 6.0.516.0.
Fixed an issue with the clock running out of sync after a while.
Fixed an issue with synchronization regarding Master-Slave-Synchronization.
The default IP address of a PLEXUS device will now be 10.x.x.x after a reset to factory defaults.
Improved display message when the MADRIX PLEXUS is set to standby mode.
Added Daylight Saving Time to the clock of the device.
Added an option to reset to default values to the menu Intensity/Speed as well as the menu
Test Sending.
When connecting to a computer without drivers, the unit will go into standby mode.
© 2013 inoage GmbH