MADRIX PLEXUS Handbuch Seite 136

136 MADRIX PLEXUS User Manual / Handbuch
'Update PLEXUS Firmware'
'Reset To Factory Default
Settings'
'Sync Clock'
Additional information on the status of the performed functions will be given on the right side of
the window. Information is displayed from down to top (the latest information is shown at the
top).
Updates the firmware of all PLEXUS devices that are connected
to the computer via USB. First, select the correct firmware in
the list above this button (Example: 'PLEXUS 1.0.000 Type
V1.0-V1.6 MADRIX 2.13'). Second, press the button. Third,
disconnect the power after updating in order to restart the
device.
Resets all settings of all PLEXUS devices that are connected to
the computer via USB to the standard values. Use this function
to restore the original, functioning state of the device.
Synchronizes the time and date of all PLEXUS devices that are
connected to the computer via USB with the local time and
date of your computer.
© 2013 inoage GmbH