Enabling Network Drivers In Madrix - MADRIX PLEXUS Handbuch

34 MADRIX PLEXUS User Manual / Handbuch
Please make sure to activate the driver for the USB connection in the MADRIX Options. To access
the Options of MADRIX, first go to the menu 'Preferences' -> 'Options' (or 'Ctrl+Alt+O'). Second,
select the tab 'Devices USB)'.
Enable the 'MADRIX PLEXUS interfaces' driver and press 'Apply'.
Close the dialog with 'OK'.

Enabling Network Drivers In MADRIX

Please note: Enabled network drivers (PLEXUS Networking) are required for the Ethernet
connection from your PC to the device.
© 2013 inoage GmbH