MADRIX PLEXUS Handbuch Seite 11

Ports
Intensity/Speed
© 2013 inoage GmbH
Start may include some abbreviations: SR for Sunrise or SS for Sunset.
You can configure Timers in your PLEXUS Configuration using MADRIX.
For more information, see
Navigate to the menu 'Stand-Alone'
All configured Ports of your current PLEXUS Configuration are listed in
this menu.
Select a specific Port with
You can check the 'Type', 'Action', Inversion, 'Threshold', and 'Value' of
each Port.
You can configure Ports in your PLEXUS Configuration using MADRIX. For
more information, see
Navigate to the menu 'Stand-Alone'
You may instantly change the Intensity (brightness) or Speed of the
device in this menu.
Press to reduce the Intensity. Press
Minimum Intensity is 0%. Maximum Intensity is 100%. The default value
is 100%.
Press to decrease Speed. Press
Minimum Speed is 1%. Maximum Speed is 1000%. The default value is
100%.
Additionally, you can change the settings for the 8 Intensity Groups.
Each Intensity Group is represented by a rectangle. At full intensity, the
rectangle will be completely white. At zero intensity, the rectangle will
be completely black.
For more information about Intensity Groups, see
You may change the settings in this menu, on the device
Values).
MADRIX PLEXUS User Manual (English)
Step 6) Creating A PLEXUS
'Ports'.
and .
Step 6) Creating A PLEXUS
'Intensity/Speed'.
to increase Intensity.
to increase Speed.
11
Configuration.
Configuration.
Remote Control.
(How To Edit