SycoTec 4033 xC-C3 Gebrauchsanweisung Seite 43

ATTENTION
• The motor spindle and accessories must be checked for damage before commissioning.
• Changes made by third parties render the approval null and void.
• Use only SycoTec original parts.
• Any claim under warranty shall be excluded if defects or the consequences thereof are due to manipulation or
modifications to the product by the customer or by any third parties not authorized by SycoTec.
Disposal of devices and accessories after use
Based on EU directive (WEEE 2012/19/EU) on waste electrical and electronic equipment, we hereby inform you that this
product is subject to the aforementioned directive and must be disposed of through special channels within Europe.
CAUTION
Hot surface! Hot surface warning!
Overload or a lack of cooling can lead to very high temperatures.
EMC analyses must be carried out and evaluated in conjunction with the inverter within the unit.
2.5 Safety measures
Safe operation and protection of the motor spindle can only be assured if it is used as intended, in accordance with the operating
manual and in adherence to the following safety measures.
ATTENTION
Tools
Tools must meet the requirements of chapter
WARNING
Work safety and accident prevention rules
• The safety precautions must be built into the machine.
• The health and safety requirements in accordance with the EC Machinery Directive 2006/42/EG and the individual
country work safety and accident prevention regulations must be followed.
ATTENTION
Maintenance and cleaning
The motor spindle must be cleaned regularly. Maintenance requirements must be followed.
WARNING
Electric voltage
• In case of incorrect handling, there is a threat to life from the electric voltage.
• The protective measures used must be checked regularly and before operation.
• Dangerous voltage due to rotating rotor even when the inverter is switched off.
3 Storage and transportation conditions
The motor spindle is delivered in stable packaging with sufficient protective padding. We recommend that you keep the packaging in
order to protect the spindle in the event of storage or to be able to pack it properly when returning it.
3.1 Transport
Ambient temperature
Relative humidity
Air pressure
3.2 Checking for transport damage
Check the delivery for transport damage upon receipt and contact your SycoTec contact person and/or the transport company in the
event of damage.
3.3 Check for completeness
Check the delivery for completeness.
8.3 Permitted
-30 – 60°C (-22 – 140°F)
15 – 93%
700 – 1,060 hPa
Protect from moisture!
tools.
7 (EN)