CMC ARIZONA VORTEX Benutzerhandbuch Seite 8

VORTEX HARDWARE
Most of the Vortex hardware
components are machined from
solid aluminum and incorporate
design features that reduce weight
and increase strength.
Attaches to Legs and Gin Pole
Head to create tripod and other
custom con gurations.
RAPTOR FEET
Uses replaceable carbide tip
for optimal grip on appropri-
ate surfaces. Rotates to
adjust orientation.
PULLEY WHEEL
1.5" Pulley Wheel attaches to
A-Frame Head using Head Pin.
Uses high-e ciency bearing.
8 | ARIZONA VORTEX KIT USER MANUAL
Attaches to A-Frame, Gin Pole Head
and feet. Fits within Outer Leg to
adjust height or join two Outer Legs.
GIN POLE HEAD
Connects to the A-Frame Head
to construct tripod & variants.
1
x
A-FRAME HEAD
3
x
1
x
3
x
INNER LEG
1
x
3
x
FLAT FEET
Features rubber sole
for optimal grip on at
surfaces. Ball joint
easily adjusts to
necessary angle.
17
x
LEG &
FOOT PINS
(Ball-lock Pin 3/8")
OUTER LEG
Attaches to feet. Can be reversed to
t into A-Frame & Gin Pole Heads.
4
x
HEAD PINS
(Ball-lock Pin 1/2")
7
x