CMC ARIZONA VORTEX Benutzerhandbuch Seite 27

CONFIGURATIONS
EASEL-LEG TRIPOD
(with Directional Pulley)
The Easel-Leg Tripod shown is a Directional Frame as the rope
supporting the load is directed through a pulley on the head and
is not anchored to the frame.
The use of hobbles alone is not enough to secure the frame in
this configuration as the frame will tend to move back when the
load is applied. This example shows all feet bolted to the floor.
If possible, avoid cantilevering the legs or head over the edge.
If the head is cantilevered, for example when lifting an unten-
dered load, secure the head with one or more guy lines.
A
CONFIGURATION:
Easel-Leg Tripod
MODE OF USE:
Directional Frame
VIEWS
TOP VIEW
NOTE: GUY LINES AND HOBBLE STRAPS OMITTED FOR CLARITY.
APPLIED
FORCE
SIDE VIEW
| cmcpro.com 27