Scheppach ACS3000 Originalbetriebsanleitung Seite 35

6. Safety Instructions for Airless Paint
Sprayer
m WARNING! Reduce the risk of fire hazards
• The machine can only be used in environments
where there is no risk of explosion.
• The Airless Paint Sprayer must not be used for
spraying flammable paints and solvents with a flash
point of less than 21°C. Flash point is the temper-
ature that a fluid can produce enough vapours to
ignite.
• Verify that all containers and collection systems are
grounded to prevent static discharge.
• Connect to a grounded outlet and use grounded ex-
tension cords. Do not use a 3 to 2 adapter.
• Do not use paint or solvent containing halogenated
hydrocarbons. See operating instructions for exam-
ples of these types of materials.
• Keep spray area well ventilated. Keep good supply
of fresh air moving through the area.
• Do not smoke in the spray area.
• Do not operate light switches, engines, or similar
spark producing products in the spray area.
• Keep area clean and free of paint or solvent contain-
ers, rags, and other flammable materials.
• Know the contents of the paints and solvents be-
ing sprayed. Read all material safety data sheets
(MSDS) and container labels provided with the
paints and solvents. Follow the paint and solvent
manufacturer's safety instructions for processing,
storage, transport and disposal.
• Fire extinguisher equipment should be present and
working.
• When working indoors:
– Make sure that no solvent vapours build up in
the area of the device.
– Set up the device on the side away from the
sprayed object.
– Keep a minimum distance of 5 m between the
device and the spray gun.
• When working outdoors:
– Make sure that no solvent vapours are blown
towards the device. Pay attention to the wind
direction.
– Set up the device in such a way that solvent
vapours do not reach the device and build up
there.
– Keep a minimum distance of 5 m between the
device and the spray gun.
m WARNING! Reduce the risk of skin injection
• Do not aim the gun at yourself, any person or animal.
• Keep hands and other body parts away from the dis-
charge. For example, do not try to stop leaks with
any part of the body.
• Always use the nozzle tip guard. Do not spray with-
out nozzle tip guard in place.
• Only use a nozzle tip specified by the manufacturer.
• Use caution when cleaning and changing nozzle
tips. In the case where the nozzle tip clogs while
spraying, follow the manufacturer's instructions for
turning off the unit and relieving the pressure before
removing the nozzle tip to clean.
• Do not leave the unit energized or under pressure
while unattended. When the unit is not in use, turn
off the unit and relieve the pressure in accordance
with the manufacturer's instructions.
• High-pressure spray is able to inject toxins into the
body and cause serious bodily injury. In the event
that injection occurs, seek medical attention imme-
diately.
• Visually inspect for damage on the hoses which may
be subjected to friction. Replace damaged hoses or
parts immediately.
• This system is capable of producing 207 bar. Only
use replacement parts or accessories that are spec-
ified by the manufacturer and that are rated a mini-
mum of 228bar.
• Always engage the trigger lock when not spraying.
Verify the trigger lock is functioning properly.
• Verify that all connections are secure before oper-
ating the unit.
• Know how to stop the unit and bleed pressure quick-
ly. Be thoroughly familiar with the controls.
m WARNING-Reduce the risk of injury
• Always wear appropriate gloves, eye protection, and
a respirator or mask when painting.
• Do not operate or spray near children. Keep children
away from equipment at all times.
• Do not overreach or stand on an unstable support.
Keep effective footing and balance at all times.
• Stay alert and watch what you are doing.
• Do not operate the unit when fatigued or under the
influence of drugs or alcohol.
• Do not kink or over-bend the hose.
• Do not expose the hose to temperatures or to pres-
sures in excess of those specified by the manufac-
turer.
• Do not use the hose as a strength member to pull or
lift the equipment.
www.scheppach.com
GB | 35