Storz ROTOCUT G2 2672x RC Gebrauchsanweisung Seite 97

87
Anhang
Recommended separation distances between portable and mobile RF communications equipment
®
The UNIDRIVE S III model 20 7010 20-1 is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled.
The customer or user of the unit can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF
communications equipment (transmitters) and the unit as recommended below, according to the maximum output power of the communications equipment.
Rated maximum output power
of transmitter
[W]
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters [m] can be estimated using the
equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts [W] according to the
transmitter manufacturer.
Note 1: At 80 MHz and 800 MHz, the higher frequency range applies.
Note 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects and
people.
Appendix
Table 6
®
and the UNIDRIVE S III model 20 7010 20-1
Separation distance d [m]
according to frequency of transmitter
150 kHz to 80 MHz 80 MHz to 800 MHz
f
0.12
0.38
1.2
3.8
12
800 MHz to 2.5 GHz
f h
0.12
0.38
1.2
3.8
12
0.23
0.73
2.3
7.3
23