Invacare Softform Active 2 Rx Gebrauchsanweisung Seite 9

NOTICE!
Heavy Soilage
Where the mattress is badly soiled, we recommend
cleaning with a dilute cleaning solution at maximum
temperature in the washing machine (see product
label).
— Clean up all spillages of bodily fluids e.g., blood,
urine, faeces, sputum, wound exudate and all
other bodily secretions as soon as possible
using a suitable detergent.
— Large spillages of blood should be absorbed and
removed with paper towels first.
WARNING!
— In event of contamination, contact your hygiene
specialist.
— Remove contaminated foams from use.
Autoclaving Covers
Autoclave the cover at 110 °C.
NOTICE!
— Make sure the cover is outstretched (not
folded).
— Do not place covers on top of each other.
6.3 Replacing Cover
1. Unzip cover and remove it carefully from the foam core.
2. Place new cover onto the foam core.
3. Close zipper.
NOTICE!
— Ensure that the corners of the foam core are
positioned correctly into the corners of the
cover.
— Ensure that the castellated foam is facing
upwards when inserted into its cover.
WARNING!
— In event of contamination, contact your hygiene
specialist.
— Remove contaminated foams from use.
7 After Use
7.1 Storage
NOTICE!
— Store device in a dry environment.
— Store device within a protective cover.
— Carefully roll up the device and store it on a
clean, dry (off-floor) surface with no sharp
edges to prevent possible damage.
— Never store other items on top of a device.
— Do not store device next to radiators or other
heating devices.
— Protect device from direct sunlight.
For environmental conditions for storage, see 9 Technical Data,
10.
9
7.2 Reconditioning
This product is suitable for reuse. To recondition the product
for a new user, carry out the following actions:
Inspection according to service plan
l
Cleaning and disinfection
l
For detailed information, see 6 Maintenance, 7.
Make sure that the user manual is handed over with the
product.
If any damage or malfunction is detected, do not reuse the
product.
7.3 Disposal
Be environmentally responsible and recycle this product
through your recycling facility at its end of life.
Disassemble the product and its components, so the different
materials can be separated and recycled individually.
The disposal and recycling of used products and packaging must
comply with the laws and regulations for waste handling in
each country. Contact your local waste management company
for information.
7 After Use
1630000-F